Digistat+1 RF

Our stylish Digistat+1RF wired room thermostat features large buttons and an easy to read digital display to show that the temperature has been set accurately.

  • Easy to install & use
  • Set-back and comfort feature
  • Easy-to-read digital display
  • ON/OFF load compensation
  • Set back/comfort features
  • Min/max temperature setting (tamper-proof when min/max are set the same)
  • Typical operating range 30m
  • Battery powered

Drayton stockists near you

Energy Class (ErP rating) IV = 2% (Acc. EU 811/2013, 812/2013, 813/2013, 814/2013)
Relevant EC directives 2014/53/EU Radio Equipment Directive Batteries Directive 2006/66/EC, 2011/65/EU RoHS Directive
Applied standards EN60730-1; EN60730-2-7; EN60730-2-9 | EN 300 220-2; EN 301 489-3
Part number Digistat+1 RF & SCR: RF710
Digistat+1 RF thermostat (spare only): 22190
SCR (spare only): 22149
Setting range 5°C to 30°C
Control accuracy +0.5ºC @ 20ºC
Temperature resolution 0.5°C
Radio frequency 433 MHz
Radio signal range 30m typically. The range may be affected by the composition / density and number of wall between the thermostat and receiver
Ball pressure test 75ºC
Pollution degree 2
Power supply Digistat+1 RF thermostat: 2 X 1.5V IEC LR6(AA) alkaline batteries
SCR (receiver): 230V a.c. 50Hz
Battery life approx. 2 years
Mounting Digistat+1 RF: Suitable for surface or conduit box mounting
SCR (receiver): Industry standard wall plate
Wiring Designed for fixed wiring only, to comply with current IET wiring regulations (BS7671).
Switch type & rating SCR (receiver): S.P.D.T 16(2)A 230V a.c. Volt free
Ambient operating temperature 0ºC to 40ºC
Ambient storage temperature –20ºC to 55ºC
Ambient operating humidity (non condensing) 25% to 90%
Ambient storage humidity 15% - 95%
Software class A
Class of housing protection IP30
Back to top