LP10RF & Digistat+2RF

Wirelessly bound, the LP10RF and Digistat+2RF provide control of heating and the hot water pre-heat function if required. The 24 hour programmable room thermostat function of the Digistat+2 RF enables time and temperature control of the heating and the LP10RF offers 7 day control of the hot water pre-heat function. Devices feature signal strength indicator ensuring a reliable connection.

  • 7 day programmes
  • 3 on/off periods per day
  • Pre-programmed on/off periods
  • Dedicated advance buttons
  • 12 or 24 hour back-lit digital display
  • Holiday function
  • Simple wireless installation
  • Wireless receiver built into the LP devices
  • Automatic summer/winter time updates
  • Pre-wired with PCB connector
  • Replaces Worcester product 7 716 192 052
  • LP10RF (programmer only) replaces Worcester Bosch product 8 716 106 667 0

Drayton stockists near you

Part number LP10RF & Digistat+2RF: RF560DR
LP10RF programmer (spare only): 22589DR
Digistat+2RF thermostat (spare only): 22090
Energy Class IV = 2% (Acc. EU 811/2013, 812/2013, 813/2013, 814/2013)
Software Class A
Relevant EC directives 2014/53/EU Radio Equipment Directive 2006/66/EC Batteries Directive 2011/65/EU RoHS Directive
Applied standards EN60730-1; EN60730-2-7; EN60730-2-9 | EN 300 220-2; EN 301 489-3
Radio Signal Range 30m typically. The range may be affected by the compostion / density and number of wall between the thermostat and receiver
Setting range 5°C to 32°C
Control accuracy LP10RF: ‹± 1 sec/day @ 25°C
Digistat+2RF: + 0.5°C @ 20°C
Timing resolution 1 minute
Hot water program type (LP10RF) 7 day
Central heating program type (Digistat+2RF) 24 hour
Hot water pre-heat settings 3 ON / 3 OFF
Central heating settings 6 per day
Radio frequency 433 MHz
Ball pressure test 90°C
Pollution degree 2
Power supply LP10RF: 24Vd.c. less than 65mA
Digistat+2RF: 2xAA 1.5V alkaline batteries
Battery life approx. 2 years
Battery back-up time and date 10 years min.
Mounting LP10RF: Boiler mounted
Digistat+2RF: Suitable for surface mounting
Wiring No wiring required
Ambient operating temperature LP10RF: 0°C to +50°C
Digistat+2RF: 0°C to +40°C
Ambient storage temperature –20°C to 55°C
Ambient operating humidity (non condensing up to 45°C) LP10RF: 30 - 95%
Digistat+2RF: 25 - 90%
Degree of housing protection LP10RF: IP24
Digistat+2RF: IP30
Back to top