Installation Guides
| ErP Class (Modulating boiler) | VI |
| ErP rating (Modulating boiler) | 4% |
| ErP Class (On/Off boiler) | VII |
| ErP rating (On/Off boiler) | 3.5% |
| Dimensions | HubR: 148mm(w) 93mm(h), 31mm(d); Room thermostat: 76mm(w), 76mm(h), 25mm(d) |
| Power supply | HubR: 230V a.c. ±10% 50Hz; Room thermostat: 2x1.5V IEC LR6 (AA) alkaline batteries |
| Switch rating | 2(1)A 230V a.c. each switch |
| Wiring | HubR: Fixed wiring only, to comply with current IET regulations (BS7671); Room thermostat: No wiring required |
| Interfaces | HubR: User: Push Button/LED; I/O: Mains Relays (1-3), Digital Boiler Interface; Room thermostat: User: TFT display, touch buttons; I/O: None |
| Operating temperature | 0°C to 45°C |
| Storage temperature | -10°C to 55°C |
| Ingress protection | HubR: IP30; Room thermostat: IP20 |
| Ambient humidity (non-condensing) | Operating 25% to 90%, Storage 15% to 95% |
| Set-point range | 5°C to 30°C |
| Control accuracy | "<0.6°C at 4°C/hour (with room thermostat)" |
| Timing resolution | 1 minute |
| Temperature resolution | 0.5°C |
| Ball pressure test | HubR: 92°C; Room thermostat: 75°C |
| Pollution degree | 2 |
| Software class | A |
| Without mains power | Display: LEDs off; Time: always kept; Programme times: always preserved |
| Rated impulse voltage | 2.5kV |
| Radio technology/frequency | 2.4GHz (Bi-directional, Mesh) |
| Radio signal range | 30m |
| Mounting | HubR: Industry standard wall plat; Room thermostat: Wall bracket or desk stand |
| Maximum radio frequency power transmitted | HubR: +17dBm (50mW); Room thermostat: +13dBm (20mW) |
| Software version | HubR: 6712093; Room thermostat: 6712090 |
| Relevant directives | Radio Equipment Directive (RED) 2014/53/EU, Batteries Directive 2006/66/EC, RoHS Directive 2011/65/E |
| Applied standards | EN60730-1; EN60730-2-7; EN60730-2-9, EN 300 328 |
| Sustainable offer status | Green Premium product |
- Where can I buy Wiser?
- Click the link below for full Wiser FAQs
